
Chapter 2. Hardware Setup
12
Connecting the VE2812R Unit
Follow the steps below to connect the VE2812R to an HDMI-enabled display
source, a compatible ATEN Video Transmitter, and other controls as required.
1. Connect an HDMI-enabled display to the VE2812R’s HDMI out port.
2. Follow the steps below to set up your audio output.
a) To use an independent speaker, connect the speaker to the VE2812R’s
audio out port (coaxial or stereo) using an appropriate audio cable.
b) Depending on the interface of your chosen audio output device, adjust
the audio signal using the audio channel switch.
Note:
Stereo audio will be muted if the channel is set to
CH5.1
.
c) To mute the audio on the connected HDMI display, put the HDMI audio
switch to
OFF
.
3. Connect the VE2812R’s HDBaseT in port to a video transmitter’s
HDBaseT out port using a Cat 6a/ATEN 2L-2910 cable.
Audio
Interface
Audio Channel
Switch
Description
Stereo
2 ch
Sets the audio output to channel 2.
Coaxial
5.1 ch
Sets the audio output to channel 5.1.
HDMI
Auto
Detects the supported audio channel of the connected
HDMI display.
Monitor
VE2812AT
(recommended)
IR Emitter /
Receiver
RS-232
VK Control System
Power
IR
IR Emitter /
Receiver
Power Adapter
Speakers
PC
HDMI
Audio
HDBaseT
IR
VE2812R
(Front)
VE2812R
(Rear)
2
4
1
3
4
7
6
5