ATEN SN0108A, User Manual

Page: 47 / 172

Chapter 2. Hardware Setup
31
plug the adapter into the modem's serial port. Then use OOB to specify the
modem port in the
Modem Settings (see OOBC , page 108)
7. (Optional)
If you wish to use a console terminal connection, use Cat 5e cable to
connect any available port on the SN9108 / SN9116 to the DTE -to-DTE
serial adapter SA0141 or SA0143. Connect the adapter’s serial connector
to the console terminal or the COM port of the computer you will use for
the console terminal. Then use OOB to specify the console port in the
Console Settings (see OOBC , page 108).
8. Use the AC power cord provided with this package to connect the SN9108
/ SN9116's Power Socket to an AC power source.
SN9108 / SN9116 Installation Diagram
4
1
2
SA0141
(DB9-F, DTE-DTE)
8
Network
Switch
SA0142
(DB9-M, DTE-DCE)
2
Network
Switch
3
Rollover Cable
(RJ45-RJ45, DTE-DTE)
6
5
Modem
SA0142
(DB9-M, DTE-DCE)
7
SA0141
(DB9-F, DTE-DTE)