ATEN SN0108A, User Manual

Page: 30 / 172

Serial Console Server User Manual
14
4 Reset Switch Note: This switch is recessed and must be pushed with a small
object such as the end of a paper clip, or a ballpoint pen.
Š
Pressing and releasing this switch when the unit is running
performs a system reset.
Š
Pressing and holding this switch in for more than three
seconds when the unit is running resets its configuration to
the factory default settings.
Note: This does not clear User Account information.
See
Clear Login Information , page 151, for
information on clearing user account information.
Š
Pressing and holding this switch while powering on the
switch returns the unit to its factory default firmware level,
rather than the firmware version that the switch has been
upgraded to. This allows you to recover from a failed
firmware upgrade and gives you the opportunity to try
upgrading the firmware again.
Note: This operation should only be performed in the event
of a firmware upgrade failure that results in the device
becoming inoperable.
No. Component Description