ATEN SN0108A, User Manual

Page: 117 / 172

Chapter 8. Device Management
101
5. Key in the email address (addresses) of where you want the SMTP
reports sent to in the To field.
Note: If you are sending the report to more than one email address,
separate the addresses with a semicolon. The total cannot exceed
256 Bytes.
Š
Log Server
Important transactions that occur on the Serial Console Server, such as
logins and internal status messages, are kept in an automatically generated
log file.
Š
To enable this, put a check in the Enable report from the following Log
Server checkbox.
Š
Specify the MAC address of the computer that the Log Server runs on
in the
MAC address field.
Š
Specify the port used by the computer that the Log Server runs on to
listen for log details in the
Service Port field. The valid port range is 1–
65535. The default port number is 9001.
Note: The port number must different than the one used for the Program
port.