ATEN SN0108A, User Manual

Page: 44 / 172

Serial Console Server User Manual
28
6. (Optional)
If you choose to install a serial modem for OOB operation (see OOBC ,
page 108), use standard Cat 5e cable to connect the modem port on the
SN0108A / SN0116A / SN0132 / SN0148's front panel to a DTE-to-DCE
serial adapter (see
RJ-45 to Serial Adapters , page 7 for details on choosing
the appropriate adapter), then plug the adapter into the modem's serial
port. For SN9108 / SN9116 models you can use any available port on the
rear of the unit.
7. (Optional)
If you wish to use a console terminal connection, use Cat 5e cable to
connect the SN0108A / SN0116A / SN0132 / SN0148 Console port to the
DTE -to-DTE serial adapter SA0141 or SA0143. Connect the adapter’s
serial connector to the console terminal or the COM port of the computer
you will use for the console terminal.
8. (Optional)
If you are using a laptop USB console to control the SN0108A / SN0116A
/ SN0132 / SN0148 locally, use the laptop USB cable included in the
package to connect the laptop to the LUC port, located on the unit’s front
panel.
9. (Optional)
If you are using USB devices (such as USB storage devices [pen drive /
hard drive], USB hubs, USB LAN cards) in your installation, connect
them to these three Type A female USB ports.
10. For AC models: Use the AC power cord provided with this package to
connect the SN0108A / SN0116A / SN0132 / SN0148's Power Socket to
an AC power source. For DC models: Connect the DC power source to the
SN0108AD / SN0116AD / SN0132D / SN0148D’s DC terminal block.