ATEN CS1842, User Manual

Page: 67 / 88

Chapter 6. RS-232 Operation
55
Restore Default Settings
The Restore Default Settings command allows you to reset all of the settings
back to the default. The default setting is off.
Use the Formula - to set Parameters - to create a Command .
Formulas:
C C [Enter]
Parameters:
Restore Default Value Command
The available formula for the Restore Default Settings command is as follows:
C C [Enter]
For example, to restore all CS1842 / CS1844 settings back to the default, type
the following:
reset on [Enter]
Command Description
reset Restore Default Settings Command
Control Description
on Enable restore default values
Enter Description
Enter Enter and send out command