ATEN CS1842, User Manual, Page: 69 / 88

Chapter 6. RS-232 Operation
57
KVM Status
The KVM Status command allows you to display read-only information about
the switches’ current configuration status. The default setting is off.
Use the Formula - to set Parameters - to create a Command .
Formulas:
C C [Enter]
Parameters:
KVM Status Command
The available formula for the KVM Status command is as follows:
C C [Enter]
For example, to display the CS1842 / CS1844’s configuration status, type the
following:
status on [Enter]
A message similar to the one below will then appear:
hotkey: [n[-] / [scrolllock],[scrolllock]
os setting: pc
keyboard emulation: enabled/disabled
keyboard layout: English
mouse emulation: enabled/disabled
monitor re-detection: enabled/disabled
Command Description
status KVM Status Command
Control Description
on Enable KVM status
Enter Description
Enter Enter and send out command