ATEN CS1842, User Manual

Page: 60 / 88

CS1842 / CS1844 User Manual
48
Switch Port (KVM and Audio Focus)
The switch port command allows you to switch the KVM and audio focus
among computers connected to the CS1842 / CS1844’s ports.
Note: This command is only supported by CS1842 / CS1844 using firmware
v. 1.1.102 or later.
Use the Formula - to set Parameters - to create a Command .
Formula:
C C [Enter]
Parameters:
Switch Port (KVM and Audio Focus) Commands
Some available formula for the Switch Port (KVM and Audio Focus)
command is as follows:
C C [Enter]
For example, to switch the KVM and audio focus to port 2, type the following:
sw i02 kvm audio [Enter]
Note: The Control command string can be skipped, and the default value will
be used.
Command Description
sw Switch Port Command
Control Description
ixx Input Port Number
x= 01~02 (CS1842); 01~04
(CS1844)
kvm audio Switch KVM and audio focus
Enter Description
Enter Enter and send out command