ATEN CS1842, User Manual

Page: 45 / 88

Chapter 4. Hotkey Operation
33
[P] [n] [Enter] Sets the KVM switching mode.

n = 1, sets the KVM to Normal Switching Mode.

n = 2, sets the KVM to Fast Switching Mode.
Note:
1. This hotkey is only supported by CS1842 / CS1844 using
firmware v. 1.1.101 or later.
2. The function (press a port selection pushbutton twice to bring
the audio focus to the computer attached to its corresponding
port) will be disabled when the fast switching mode is enabled,
see
Alternative Manual Port Selection Settings , page 19.
[X] [Enter] Enables/disables Hotkey Port Switching.
[Esc] or
[Spacebar]
Quits setting mode.
Key Function