ATEN CS1768, User Manual

Page: 59 / 78

Chapter 5. Hotkey Operation
49
HSM Summary Table
After invoking HSM (see page 41), key in one of the following keys to perform
the corresponding function:
Key Function
[ PN ] [Enter] Switches KVM, Audio, and USB focus directly to the
computer that corresponds to that port ID. (
PN = port
number)
[ PN ] [K] [Enter] Switches KVM focus only directly to the computer that
corresponds to that port ID. (
PN = port number)
[ PN ] [U] [Enter] Switches USB focus only directly to the computer that
corresponds to that port ID. (
PN = port number)
Note: This hotkey functions on the first level of an
installation only.
[A] [Enter] Starts Auto Scan. The KVM focus cycles from port to port
at the default 5-second intervals
[A] [ n ] [Enter] Starts Auto Scan at n -second intervals ( n = 1–255
seconds)
[H] Toggles between the default ([Num Lock] [-]) and alternate
([Ctrl] [F12]) HSM invocation keys.
[T] Toggles between the default ([Scroll Lock] [Scroll Lock])
and alternate ([Ctrl] [Ctrl]) Port Switching keys.
[F1] Sets the port OS to Windows.
[F2] Sets the port OS to Mac.
[F3] Sets the port OS to Sun.
[F5] Performs a keyboard / mouse reset on the target
computer.
[B] Enables/Disables the buzzer.
[R] [Enter] Resets the hotkey settings to their default status. See
Factory Default Hotkeys and Settings , page 65.
[D] Invokes Video DynaSync, ATEN’s exclusive technology
that eliminates boot-up display problems and optimizes
resolution when switching between ports.
[M] Enables/Disables mouse emulation.
[
←
] Skips to the previous computer on the list, in skip mode.