ATEN CN8000 User Manual Download Page 178

Page: 178 / 208

CN8000 User Manual

164

Technical Support

International

For online technical support – including troubleshooting, documentation,
and software updates:

http://eservice.aten.com

For telephone support, see

Telephone Support

, page iii.

North America

When you contact us, please have the following information ready beforehand:

Product model number, serial number, and date of purchase.

Your computer configuration, including operating system, revision level,
expansion cards, and software.

Any error messages displayed at the time the error occurred.

The sequence of operations that led up to the error.

Any other information you feel may be of help.

Email Support

[email protected]

Online
Technical
Support

Troubleshooting
Documentation
Software Updates

http://www.aten-usa.com/support

Telephone Support

1-888-999-ATEN ext 4988

Summary of Contents for CN8000

















































































































































































































Search results

Summary of Contents for CN8000

Reviews:

ATEN CN8000, User Manual, Page: 178 / 208

Search results

Summary of Contents for CN8000

Reviews: