ATEN CN8000, User Manual, Page: 15 / 208

1
Chapter 1
Introduction
Overview
The CN8000 is a control unit that provides “over-IP” capability to KVM
switches that do not have built in over-IP functionality. It allows operators to
monitor and access their computers from remote locations using a standard
Internet browser or Windows and Java based application programs. The
CN8000 connects to the Internet, an Intranet, LAN, or WAN using industry
standard Cat 5e cable, then uses a custom KVM cable to connect to a local
KVM switch or server.
Because the CN8000 uses TCP/IP for its communications protocol, the server
or KVM switch it is connected to can be accessed from any computer on the
Net – whether that computer is located down the hall, down the street, or half-
way around the world.
Operators at remote locations connect to the CN8000 via its IP address. Once
a connection has been established and authorization granted, the remote
computer can exchange keyboard, video and mouse signals with the server (or
servers on a KVM switch installation), just as if they were physically present
and working on the equipment directly.
The CN8000 expands on previous models by providing a dedicated RS-232
port for modem access or serial console management, a PON port to attach a
Power Over the NET™ device and USB 2.0 virtual media capability.
KVM Switch