ATEN CN8000 User Manual Download Page 132

Page: 132 / 208

CN8000 User Manual

118

Mouse DynaSync Mode

Clicking this icon selects whether synchronization of the local and
remote mouse pointers is accomplished either automatically or

manually. DynaSync operation is the same under the JavaClient as it is under
the WinClient. See

Mouse DynaSync Mode

, page 98, for details.

Control Panel Configuration

Clicking the

Control Panel

icon brings up a dialog box that allows you

to configure the items that appear on the Control Panel, as well as its

graphical settings:

Control Panel Configuration is almost the same under the JavaClient as it is
under the WinClient. See

Customize Control Panel

, page 100, for details.

Note:

The following functions found with the WinClient are not available
with the JavaClient: the

Transparent

control panel style; and

Screen

Options

. In addition, the BMP graphics format (in the Snapshot

section), has been replaced by PNG.

Summary of Contents for CN8000

















































































































































































































Search results

Summary of Contents for CN8000

Reviews:

ATEN CN8000, User Manual, Page: 132 / 208

Search results

Summary of Contents for CN8000

Reviews: