ATEN CM1164A, User Manual

Page: 91 / 152

Chapter 6. RS-232 Operation
79
RS-232 Commands
This section lists the RS-232 commands and provides information on
command syntax.
Verification Messages
Refer to the following table for details on verification messages that appear in
the command line after entering a command.
Verification Message Description
Command OK Command or parameter is correct.
Command incorrect Command or parameter is incorrect.
NOT Login Command sent without RS-232 login.
login OK Password correct and login successful.
login FAIL Incorrect password.
SETTING OK Some commands support the “save” parameter, so when you
input “save” the system will check all current input commands
and parameters, and a feedback message of “SETTING OK”
will return if all commands and parameters are correct.
Otherwise the system will return a “SETTING FAIL” message.
SETTING FAIL Some commands support the “save” parameter, so when you
input “save” the system will check all current input commands
and parameters, and a feedback message of “SETTING FAIL”
will return if a command or parameter is incorrect.