ATEN CM1164A, User Manual

Page: 116 / 152

Multi-View KVMP™ Switch User Manual
104
Video DynaSync
The Video DynaSync command allows you to set the EDID settings. Type your
command in the following format:
C C [Enter]
For example, to set the FHD EDID setting, type the following:
vds fhd [Enter]
Note: 1. Each command string can be separated with a space.
2. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
Command Description
vds Video DynaSync Command
Control Description
fhd Set the EDID to FHD among all the connected displays.

The resolution is 1920 x 1080 @60Hz
port 1 Set the EDID to the EDID of the monitor connected to port 1 of
the Multi-View KVMP™ Switch.
port 2 Set the EDID to the EDID of the monitor connected to port 2 of
the CM1284.
remix Set the EDID to an optimum among all the connected
displays.
4kuhd Sets the EDID to 4K UHD among all the connected displays.

The resolution is 3840 x 2160 @30Hz
4kdci Sets the EDID to 4K DCI among all the connected displays.

The resolution is 4096 x 2160 @30Hz