ATEN CM1164A, User Manual, Page: 118 / 152

Multi-View KVMP™ Switch User Manual
106
Activate Beeper
The Activate Beeper command allows you to enable/disable the beeper
function. Type your command in the following format:
C C [Enter]
For example, to enable the beeper, type the following:
beeper on [Enter]
Note: 1. Each command string can be separated with a space.
2. To avoid RS-232 command loss, it is recommended to enter every
RS-232 command with a two-second gap.
Command Description
beeper Activate Beeper Command
Control Description
off Disable beeper
on Enable beeper