ATEN CM1164A User Manual Download Page 144

Page: 144 / 152

Multi-View KVMP™ Switch User Manual

132

Technical Support

International



For online technical support – including troubleshooting, documentation,
and software updates:

http://eservice.aten.com



For telephone support,

Telephone Support

, page iv.

North America

When you contact us, please have the following information ready beforehand:



Product model number, serial number, and date of purchase.



Your computer configuration, including operating system, revision level,
expansion cards, and software.



Any error messages displayed at the time the error occurred.



The sequence of operations that led up to the error.



Any other information you feel may be of help.

Email Support

[email protected]

Online
Technical
Support

Troubleshooting
Documentation
Software Updates

http://www.aten-usa.com/support

Telephone Support

1-888-999-ATEN ext 4988

Summary of Contents for CM1164A

























































































































































Search results

Summary of Contents for CM1164A

Reviews:

Related manuals for CM1164A

Brands by name

Popular brands

ATEN CM1164A, User Manual

Search results

Summary of Contents for CM1164A

Reviews:

Related manuals for CM1164A

Brands by name

Popular brands