ATEN CM1164A, User Manual

Page: 73 / 152

Chapter 4. Hotkey Operation
61
[V] [n] [Enter] Configure the EDID (n) for the KVM Switch.

n = 1 (Uses the EDID of the monitor connected to
Port 1.)

n = 2 (Uses the EDID of the monitor connected to
Port 2. This setting is supported by CM1284 only.)

n = 3 (Sets the EDID to Remix mode, with which the
Multi-View KVMP™ Switch uses the optimum
EDID.)

n = 4 (Sets the EDID to FHD which is 1920 x 1080
@60Hz.)

n = 5 (Sets the EDID to 4K UHD which is 3840 x
2160 @30Hz. This setting is supported by CM1284
only.)

n = 6 (Sets the EDID to 4K DCI which is 4096 x
2160 @30Hz. This setting is supported by CM1284
only.)
General
Settings [F1] [Enter] Enables the operating system to SPC.
[F2] [Enter] Enables Mac keyboard emulation.
[F3] [Enter] Enables Sun keyboard emulation.
[F4] [Enter] List the current settings of the Multi-View KVMP™
Switch. To use this function, open a text editor or word
processor, and place the cursor in the page window
before invoking the HSM and enter the hotkey.
[F5] [Enter] Reset USB devices. If any USB devices lose focus or
connectivity, a USB reset may solve the issue.
[F6] [nn] [Enter] [n] sets the keyboard language:

n = 08 (French)

n = 09 (German)

n = 15 (Japanese)

n = 33 (English)
[F10] [Enter] Enables Windows keyboard emulation. This is the
default setting.
[B] [Enter] Enable or disable the beeper.
[E] [Enter] Enable or disable Power On Detection with which the
Multi-View KVMP™ Switch switches to the next
powered-on computer when a computer that has KVM
focus is powered off.
Hotkey Function