ATEN CL3800 User Manual Download

Page: 5 / 60

CL3800 User Manual

Package Contents

Basic Package

The basic CL3800 package consists of:

1 CL3800 Dual Rail USB HDMI DVI VGA LCD Console with Standard
Rack Mount Kit

1 USB HDMI KVM Cable Set

1 Firmware Upgrade Cable

1 Power Cord

1 User Instructions*

Optional Equipment

Depending on any optional equipment that you may have purchased, one of the
following items may be included in your package:



Standard Rack Mount Kit – Long (2X-040G)



Easy-Installation Rack Mount Kit – Short (2X-041G)



Easy-Installation Rack Mount Kit – Long (2X-042G)

Check to make sure that all of the components are present and in good order.
If anything is missing, or was damaged in shipping, contact your dealer.

Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the console or to any other
devices on the CL3800 installation.

Changes may have been made to the manual since it was published. Please
visit our web site to download the most up-to-date version of the manual

Manual Part No.

Manual Date: 2018-03-01

All other brand names and trademarks are the registered property of their respective owners.

Summary of Contents for CL3800





























































Search results

Summary of Contents for CL3800

Reviews:

Related manuals for CL3800

Brands by name

Popular brands

ATEN CL3800, User Manual

Search results

Summary of Contents for CL3800

Reviews:

Related manuals for CL3800

Brands by name

Popular brands