[27]
Route 2:
The memory of point coordinates can be entered in manual one by one at the same time. In order to get points
of coordinate in memory, press “ZERO” button and enter the desired memory number then press "ENT"
button.to enter X coordinate “Sx”, to enter Y coordinate “Sy”, to enter Z coordinate “Sz”, to enter W
coordinate press “Sw” button and coordinate values are entered with the numeric buttons.
Points of coordinate in memory is referenced by the "Absolute" operation mode.
It can be reached to points of coordinate by using buttons.
Tables will be brought to the location stored.
The "Zero" button is pressed and the desired memory
record number is entered. To go to this memory number
the press “ENT” button.
The memory number shows in the previous screen, a
"ABS" shown in the window.
One by one axis reset button (X0, Y0, Z0, W0) is pressed.
The coordinates are saved to memory.
