ATECH ACK700 User Manual Download Page 36

Page: 36 / 38

10.TROUBLESHOOTING GUIDE

Here are some recommendations for solving urgent problems. If the trouble cannot be solved, or if you have a problem other
than those described hereunder, please contact our technical service or your nearest dealer.

TROUBLE

CAUSES

REMEDY

Low surface quality (at aluminum
and similar materials) :

Rough surface,

Large chip,

Not homogenous surface,

Saw blade traces visible

Not cooling the saw blade surfaces

Lubricating the saw blade cutting sur-
faces,

Using of cooling liquid

Using of damaged or blunt saw blade

Check the saw blade teeth. Replace if

necessary.

Saw blade moves to quick

The cutting speed is too high for the

material. Decrease the cutting speed.

Motor does not work (Start but-

ton is pressed, not working)

No power supply to the machine.

Check the electric cable connections.

Check the electric power sockets.

Summary of Contents for ACK700







































Search results

Summary of Contents for ACK700

Reviews:

Related manuals for ACK700

Brands by name

Popular brands

ATECH ACK700, User Manual

Search results

Summary of Contents for ACK700

Reviews:

Related manuals for ACK700

Brands by name

Popular brands