5.
Check the power source voltage. It has to be in accordance with the values stipulated on the machine’s type label.
6.
After electrical connection is made, machine must be operated in idle running and it must be controlled whether
rotation directions of cutting tools are correct or not and if the rotation direction is wrong, appropriate connection
must be made.
6. MACHINE SAFETY INFORMATION
1.
Lifting, installation, electric maintenance of the machine should be carried out by qualified personnel only.
2.
Routine maintenance and scheduled maintenance should be carried out by qualified personnel after unplugging the
machine first.
3.
Ensure that the machine has been cleaned, tested and maintained before starting to operate it.
4.
Check the safety devices, power cable and moving parts regularly. Don’t operate the machine before having r e p l a c e d
defective safety devices or faulty parts.
5.
Never replace the milling cutters before unplugging first.
6.
Keep foreign materials away from the working area of the machine, keep away from the machine’s moving
parts
7.
Do not work on the machine by removing the protective parts
The safety data have been defined above. In order to prevent physical damage or damage to the equip-
ment, please read the safety information carefully and keep the manual always in an easy accessible
place.
7. OPERATION
25
Summary of Contents for ACK700
