5.
All directives, recommendations and general safety rules contained in this manual have to be observed fully.
The machine cannot be operated in any way for purposes other than those described herein. Otherwise, the
manufacturer shall not be deemed responsible for any damages or injuries. And such circumstances would lead
to the termination of the warranty
2.
General Safety Information
1.
The power cable should be led in such a way that nobody can step on it or nothing can be placed on it. Special
care has to be taken regarding the inlet and outlet sockets
2.
Don’t overload machines for drilling and cutting. Your machine will operate more safely with power supply in
accordance with the stipulated values.
3.
Use correct illumination for the safety of the operator. (ISO 8995-89 Standard The lighting of indoor work sys-
tem)
4.
Use correct illumination for the safety of the operator. ( ISO 8995-89 Standard The lighting of indoor work sys-
tem)
5.
Don’t use any materials other than those recommended by the manufacturer for cutting operations on the
machine.
6.
Ensure that the work piece is clamped appropriately by the machine's clamp or vice
7.
Ensure safe working position, always keep your balance.
21
Summary of Contents for ACK700
