ATB AQUAmax PROFESSIONAL G, Installation Instruction, Operating And Maintenance Manual, Page: 43 / 56

Installation, operating and maintenance manual AQUAmax
®
PROFESSIONAL G
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-Nr.: 9060 XXXX / Stand: 08.01.2019 / Seite 43 von 56
Terminal box
Terminal configuration:
4 x L, 4 x N, 8 x PE power supply 110...250V, 50...60Hz
Outlets
A1, N / A2, N Aerator 1 / 2 (Mixer for XLAM) Phase / Neutral
F1, N / F2, N Feed pump 1 / 2 Phase / Neutral
C1, N / C2, N Clear water pump 1 / 2 Phase / Neutral
SL, N Sludgepump Phase / Neutral
UV, N UV-lamp Phase / Neutral
P, N Precipitant dosingpump Phase / Neutral
Inputs 12 V DC
S1 / G Float switch SW1 Phase / Ground
S2 / G Float switch SW2 Phase / Ground
S3 / G Float switch SW3 Phase / Ground
S4 / G Float switch SW4 Phase / Ground
US / G UV-sensor Phase / Ground
PL / G Precipitant level control Phase / Ground
Inputs 4-20 mA, max. 24V
A+, A- /B+, B- Analog Inputs Plus / Minus
CAN-Bus for networking of multiple control units
2 x 24V, GND, H, L
Potential free contacts max. 250V AC, 5A
NO1, CO1, NC1 Alert contact 1 potential free
NO2, CO2, NC2 Alert contact 2 potential free
Aggregate no. no. Aggregate
sludgepump (SL) F1 F2 UV + dosingpump (UV+P)
clearwaterpump 1 (C1) F3 F4 clearwaterpump 2 (C2)
feedpump 1 (F1) F5 F6 feedpump 2 (F2)
aerator 1 (A1) F7 F8 aerator 2 (A2)
Assignment of microfuses T6.3A (see label in the terminal cover)