ATB AQUAmax PROFESSIONAL G, Installation Instruction, Operating And Maintenance Manual, Page: 28 / 56

Installation, operating and maintenance manual AQUAmax
®
PROFESSIONAL G
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-Nr.: 9060 XXXX / Stand: 08.01.2019 / Seite 28 von 56
In the case of wrong settings, the commissioning may finally restart by
entering “no”. Confirm the correct entries with „yes“ and
OK.
Display information
Info
Info display indicates the type of plant, the selected PT - number, the serial
number, the software version number and the current time.
(here installation type XL, 60 PT, serial number 654321, software version
V0.02.04)
Runtimes
With ↑ and ↓ you can change the display from Info to runtimes, to current
phase and to the main menu.
Actual phase
The display "actual phase" contains information about the plant type with PT
number and active treatment phase. The switching state of the float switches
1 - 4 *, the time and possible existing errors on the bottom line.
*
1 for closed float switch, 0 for opened float switch.
1. position = SW1 = SBR minimum level [H
W, min
]
2. position = SW2 = SBR maximum level [H
W, max
/ PROFESSIONAL only]
3. position = SW3 = buffer low level [PROFESSIONAL only]
4. position = SW4 = buffer high level [PROFESSIONAL XL and G optional]
Main menu
In the main menu you have the opportunity to request further information or
to make changes to specific settings.
Logbook
In the logbook you will find entries for errors, runtimes, events and
messages.
Use the arrow keys
↑↓ to scroll to the next following or prior entry.
Once the memory is full, the oldest entry is overwritten.
Parameter details
: