ATB AQUAmax PROFESSIONAL G, Installation Instruction, Operating And Maintenance Manual, Page: 31 / 56

Installation, operating and maintenance manual AQUAmax
®
PROFESSIONAL G
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-Nr.: 9060 XXXX / Stand: 08.01.2019 / Seite 31 von 56
Service Mode
In the “service mode” all relevant and necessary operating parameters for the
wastewater treatment plant can be changed. Please note that incorrect
settings can cause a faulty operation!
Access to the service mode via a 6 - digit code number, which is made
available exclusively to authorized service specialists.
The entries are not checked for plausibility!
In this case warranty claims are excluded by ATB
Umwelttechnologien GmbH!
The individual parameters are presented to you on the following pages. If
you have questions please contact us at any time!
When exiting the service mode, the program continues at the same point, as
before the entry.
Plant type
Select the plant type.
PT number
Entering the PT number will automatically load the default parameter set for
this size. This means that, as a rule you need to carry outy no further
actions.
The pre-set parameters for the individual dimensions are given in the
appendix.
Operating parameters
To enter and to change relevant parameters.
The data displayed starting with „info“ emerge from the
inputs and cannot be modified directly.
.
cycles per day
Central specification of the desired number of cleaning
cycles per day. From this, the maximum cycle time
results (see following line).
S
S
E
E
R
R
V
V
I
I
C
C
E
E
M
M
O
O
D
D
E
E