ATB AQUAmax PROFESSIONAL G, Installation Instruction, Operating And Maintenance Manual, Page: 33 / 56

Installation, operating and maintenance manual AQUAmax
®
PROFESSIONAL G
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-Nr.: 9060 XXXX / Stand: 08.01.2019 / Seite 33 von 56
info feed pause
Time between the end of one charging and the next
charging (resp. end of reaction phase).
additional nitri
The last nitrification phase prior to settling phase may
be extended by a corresponding input.
Caution: As a
result the other nitrification phases and the feed
pause will be shorter.
info off-time feed.
Information about the time span between the end of
the last charging and the first charging at the
beginning of the next cycle.
info no. deni (not in the XLA system)
Information about the number of denitrification phases
for one cycle.
deniphase (not in the XLA system)
Duration of the denitrification phase (begins with a
feeding, but is independent of it).
deni aer. ON/OFF (not in the XLA/XLAM)
Setting for the intermittent agitation of the aerator
during deni phase. In PROFESSIONAL XLAM the
mixer is automatically in continuous operation during
deniphase.
info nitri duration
Info display indicating the duration of a nitrification
phase.
nitri aer. non-stop (only PROFESSIONAL XLA/XLAM)
Deciding whether the aerator operates continuously or
intermittently during the nitrification.
When nitri aer. non-stop is OFF the intermittent
operation can be parameterized (factory settings:
10min ON and 10min OFF).
With plant type XLAM the mixer is oriented to the
aerator settings (aerator ON
Æ mixer OFF, aerator
OFF Æ mixer ON).
nitri aer. ON/OFF
Setting parameter for the intermittent aeration during
nitrification.
S
S
E
E
R
R
V
V
I
I
C
C
E
E
M
M
O
O
D
D
E
E