Installation, operating and maintenance manual AQUAmax
®
PROFESSIONAL G
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-Nr.: 9060 XXXX / Stand: 08.01.2019 / Seite 20 von 56
Cable connection and test run
Only for British standard plug system with earthing contact!
Take the adapter plug and the plug.
Press the plug into the adapter plug
The new plug is ready.
One-way assembly, to the unique
and for fixed connection. Without
destruction not solvable!
Pull the cable from the pit(s) through the empty
conduit(s) up to the pro
Control
©
2 control system
(pull wire). Cable lengths longer than 15 m are to
be considered when ordering.
Insert the special plug into the appropriate socket
of the pro
Control
©
2 control system and hand
tighten (see next pages).
Still do not connect the control system to the
mains.
The plant must now be filled be
filled with water at least up to the
switch-ON point of the lower float
switch in the SBR [SW1].
Following connection of the control system to the
mains it is activated and is in the program mode.
Please continue with commissioning and
functional check in accordance with the details
for the pro
Control
©
2 in the corresponding
chapter of this operating manual.
Summary of Contents for AQUAmax PROFESSIONAL G
Page 54: ......
Page 55: ......
Page 56: ...Manual AQUAmax PROFESSIONAL G Art Nr 9060 XXXX Stand 08 01 2019...