Operating instructions AQUAMAX
®
PRO G
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 17 from 36
cycles per day
Central specification of the desired number of cleaning
cycles per day. From this, the maximum cycle time
results (see following line).
info cycle duration
Maximum duration of one complete treatment cycle.
This time can be shortened, for example by economy
modes or shorter clear water evacuation times.
settling phase
Duration of the sedimentation time before clear water
evacuation takes place.
flushing pulse
Short switch-on of the pumps for the time of the
flushing pulse (see functional description)
CW evacuation
Maximum time allowed for the clear water evacuation.
If the lower float switch in the SBR [SW1] does not
switch from ON to OFF during this time (display: 1
0), an alarm message will be generated.
SL removal
Duration of the excess sludge removal.
Occurs immediately after an aeration (CLASSIC,
BASIC, PRO G) or at the end of a cycle (PRO XL).
Only if run in phase is 0 days.
CW follow-up
For systems that are equipped with a float switch
Aqua
Switch
©
(BASIC, CLASSIC) the clear water
evacuation time will be extended for this time setting
after reaching the minimum water level HWmin. A new
switching operation of the float by back running water
after completion of the pumping is prevented..
info reaction ph.
Info duration of the treatment phase. This time is
calculated from the previously entered settings.
feed. p. cycle
Number of the charges per cycle. The charging
phases are divided equally between the reaction
phases. With the feeding as well a denitrification
phase starts.
feeding duration
Run time of the feed pump (BASIC: number of feed
batches), based on a flow rate of 150 l/PT/d and a
cycle duration of 8h with 3 feedings per cycle.
S
S
E
E
R
R
V
V
I
I
C
C
E
E
M
M
O
O
D
D
E
E