ATB AQUAMAX PRO G, Operating Instructions Manual, Page: 10 / 36

Operating instructions AQUAMAX
®
PRO G
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 10 from 36
Control unit pro
Control
©
2
Splashproof IP 54
7-figure backlight graphic display
4 Kurzhubtasten hinter Folie
2 LEDs green (Operation) / red (Error
)
Separate 230V terminal space includes
fine fuses 8 x T6.3A,
1 x 1A with replacement fuses
Circular plug-in connectors for
AQUAMAX
® PRO G, BASIC and
CLASSIC
Yellow = Buffer
Blue = Aggregate SBR (without compressor) and float switch Hw
min
SBR,
BASIC/CLASSIC
Black = Float switch Hw
max
SBR (PRO G)
The pro
Control
© 2 control unit serves for the operation of SBR wastewater treatment plants of the
AQUAMAX ® series.
The control unit – independent of plant type – is suitable for the connection of in each case up to
two aeration units (or one aerator and one mixer), two charging, two clear water pumps, one
sludge pump, one UV-disinfection plant, one system for phosphate precipitation and four float
switches for level indication
.
Equipment characteristics

Controlled by microprocessor

Protection marking for electrical enclosures IP54

Wall mounting

Undervoltage failure signalling (UVS)

2 potential-free contacts for alarm facility

Activation of a dosing pump for phosphate removal

Activation of a UV-system for disinfection

Comprehensive logbook documentation

Simple and rapid handling by 4 softkey operation

Times for all parameters completely pre-programmed

Automatic run-in phase with suppression of the excess sludge removal

Parameter settings freely selectable

Selection of 6 menu languages (German, English, French, Spanish, Rumanian, Polish,
Italian)

Can be used for AQUAMAX
®
BASIC, CLASSIC and PRO

Ready-to-connect version for BASIC, CLASSIC und PRO G

Following power failure (< 30 min) restart at the interrupted program point

Wide range power supply 110 – 250V, 50/60Hz