AT&T MERLIN PIus, Installer'S Manual, Page: 50 / 57

Printing Call
To print the current settings of call processing options,
Processing Reports
perform the following steps:
1
2
3
4
Select an outside line and dial a telephone number that
is answered by the MERLIN Attendant.
NOTE: If you are programming from a remote
location using a single-line standard Touch-
Tone phone, enter only one pound (#) sign for
every two pound signs (##) that appear in a
programming command.
Wait for an answer.
Dial * followed immediately by the authorized caller
code and ##.
Dial *29 followed by the appropriate selection:
01
= Day Answer Delay
02
= Night Answer Delay
03
= Dialing Delay
5 Dial ##.
6 Once the report is completed, exit authorized caller
mode by dialing *##.
7 To disconnect, dial ##.
LOST AUTHORIZED
If the default authorized caller code (789) is changed and
CALLER CODE
the new code is lost or forgotten, the default code can be
restored. However, this procedure also restores all the
MERLIN Plus system default settings so that any changed
programmed setting must be reentered and all
announcements must be rerecorded.
To restore the default authorized caller code:
1 On the back of the MERLIN Attendant, set switches 1
and 2 to off (up).
Troubleshooting 3 - 9