AT&T Merlin Legend BIS22 Supervisor Manual Download Page 46

Page: 46 / 82

Features

Calling Group Message

Receiver

Your system manager can program a calling group to receive

messages and choose a particular display telephone as the
message receiver. Any display telephone, such as your

telephone, an agent telephone, or the telephone of a

co-worker who is not part of the group, can be chosen to be
the message receiver. Calling groups can share the same
message receiver.

The system operator
display message for

or any other inside caller can leave a

the group. Inside callers waiting in the

calling group queue can leave a message by dialing-the
feature code for leaving a message (pressing Feature and
dialing

53,

followed by the calling group’s extension number.

The system operator can leave a message by using either the
feature code or the Send/Remove Message button on his or

her console.

The designated message receiver’s message lamp will light if
there is a voice mail message in the calling group’s mailbox.

A calling group without a message receiver cannot receive
messages at the calling group’s extension. A caller who tries
to leave a message hears an error tone or sees

Can’t

Send/Remove Message

on a display telephone.

Calling Group Message Receiver

3-3

Summary of Contents for Merlin Legend BIS22



















































































Search results

Summary of Contents for Merlin Legend BIS22

Reviews:

Related manuals for Merlin Legend BIS22

Brands by name

Popular brands

AT&T Merlin Legend BIS22, Supervisor Manual

Search results

Summary of Contents for Merlin Legend BIS22

Reviews:

Related manuals for Merlin Legend BIS22

Brands by name

Popular brands