manualshive.com logo in svg

AT&T Merlin Legend BIS22, Supervisor Manual

Share
Download
AT&T Merlin Legend BIS22 Supervisor Manual Download Page 45

Features

Auto Login and Auto Logout

Calling groups can be programmed with Auto Logout to
change the status of an agent’s telephone automatically. The
status changes from available to unavailable if the call is not
answered within five rings. Then, the unanswered call is sent

to an available agent or to the front end of the calling group
queue if no agents are available. When the status of a
telephone is changed to unavailable, it remains unavailable
for subsequent calling group calls until it is again signed in.

Another function of Auto Logout is to make all agents

unavailable after a power failure. They must sign in when the

system starts up again.

Auto Login does the opposite of Auto Logout. When a calling
group is programmed with Auto Login, a call continues to ring
at an agent’s telephone until the call is answered or the caller
hangs up. In addition, after a power failure, Auto Login
automatically makes all agents in the calling group available.

They do not need to sign in when the system starts up again.

3-2

Auto Login and Auto Logout

Summary of Contents for Merlin Legend BIS22



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands