manualshive.com logo in svg

AT&T Merlin II Feature Module 2, System Manual

The AT&T Merlin II Feature Module 2 System Manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions and information on how to maximize the features and functionality of the Merlin II Feature Module 2. Get your manual now and unlock the potential of your AT&T Merlin II system.

Share
Download
background image

ERROR—CU 1 Faulty or Disconnected. CMS Cannot Manage Calls.

Status lndicator:  CU 1  [flashing)

Effect on Call Management: Until this problem is corrected, CMS cannot
manage calls. See “Managing Calls if CMS is Disabled” at the end of this

section of the manual.

Possible cause

Corrective action

There’s a loose

Make sure one end of the cable is securely

connection between the

plugged into the CU 1 jack at the back of the

CU 1 jack and the

PC and the other end is securely plugged into

MERLIN II system

the jack in the MERLIN II system control unit

control unit.

assigned to CU 1.

The cable is faulty.

Try switching the cables plugged into CU 1
and CU 2. Unplug the cable from the CU 1
jack and plug it into CU 2, and vice versa, If
the CU 1 indicator on the screen stops flashing
and the CU 2 indicator goes on, you know the
problem is either a faulty cable or a faulty
MERLIN II system component. Do  not  plug
the cables back into their original jacks on the
CMS card. Restart CMS. CMS can manage
calls using only the CU 1 jack while you
further isolate and correct the problem.

The jack in the MERLIN

1   

Unplug the CU 1 cable from its jack in the

II system control unit

MERLIN II system control unit and plug it

assigned to CU 1 is

into another attendant jack, The control

faulty.

unit jacks that can be attendant jacks are
marked “ATT” on the Station Jacks section
of the MERLIN II system Master Planning
Form.

2   

Administer the jack as an attendant jack

following the instructions under the
heading “Designate Attendant Positions”
in “Step 3: Perform Basic Administration”
in Section 4 of the  MERLIN II

Communications System with Feature Module 2

Installation and Administration Manual.

The CU 1 jack on the

If none of the above actions corrects the

CMS card is faulty.

problem, contact your equipment supplier for
assistance.

9-4  Startup Problems

Summary of Contents for Merlin II Feature Module 2

































































































































































































































Reviews:

No comments

Related manuals for Merlin II Feature Module 2

Zenith Allegro Operating Manual & Warranty preview
Allegro
Brand: Zenith Pages: 24
Panasonic KX-A406 Quick Start Manual preview
KX-A406
Brand: Panasonic Pages: 24
DAC Limited 711 Series User Manual preview
711 Series
Brand: DAC Limited Pages: 12
Watts AERCO 58025-05 Technical Instructions preview
AERCO 58025-05
Brand: Watts Pages: 24
Uniden TRU548 Owner'S Manual preview
TRU548
Brand: Uniden Pages: 68
Uniden EXP2900 Owner'S Manual preview
EXP2900
Brand: Uniden Pages: 28
Bluestream DA11ABL-WP-US Quick Reference Manual preview
DA11ABL-WP-US
Brand: Bluestream Pages: 4
Panacom PA-7400 User Manual preview
PA-7400
Brand: Panacom Pages: 10
Earthworks FlexWand FW430 User Manual preview
FlexWand FW430
Brand: Earthworks Pages: 10
Dictaphone Connexions Quick Reference preview
Connexions
Brand: Dictaphone Pages: 24
BT Diverse 6210 User Manual preview
Diverse 6210
Brand: BT Pages: 70
Panasonic KX-TG7892AZ Operating Instructions Manual preview
KX-TG7892AZ
Brand: Panasonic Pages: 80
GE 15-Feb User Manual preview
15-Feb
Brand: GE Pages: 18
GE 15401270 User Manual preview
15401270
Brand: GE Pages: 2
GE 16043750 User Manual preview
16043750
Brand: GE Pages: 2
GE 2-9120/2-9130 User Manual preview
2-9120/2-9130
Brand: GE Pages: 2
GE 2-9120/30 Specifications preview
2-9120/30
Brand: GE Pages: 2
GE 2-9121 User Manual preview
2-9121
Brand: GE Pages: 2

Brands by name

Popular brands

Load more brands