Changing the Far-End Disconnect Setting and Adding a
3 db Boost
F-3
Figure F-2 shows the location of the switch for changing the far-end
disconnect signal.
Figure F-2. Location of Switches for Far-End Disconnect and 3 db Boost
5. Set Switch 1 to the appropriate setting:
ON
: the CO sends busy tone to signal far-end disconnect.
OFF
: the CO sends a reliable forward disconnect signal. (This is the
default.)
6. Plug the disk drive assembly into the MERLIN LEGEND MAIL module.
Summary of Contents for Lucent Technologies MERLIN LEGEND
Page 53: ...Index IN 3...
