Changing the Far-End Disconnect Setting and Adding a
3 db Boost
F-2
To change the far-end disconnect signal:
!
CAUTION:
Before touching leads, connectors, pins, and other components when
handling the disk drive, use a properly grounded wrist strap to prevent
damage from electrostatic discharge (ESD).
1. Busy out the slot in which the MERLIN LEGEND MAIL module is
2. Remove the MERLIN LEGEND MAIL module. See Appendix C.
3. Place the MERLIN LEGEND MAIL module on its side with the six-sided
cutout (with two metal handles) facing up (Figure F-1).
4. Grasp the two metal handles and gently wriggle the part attached to the
handles out of its connectors (Figure F-1). This is the disk drive assembly.
Figure F-1. Removing Disk Drive Assembly
RMD Reset
C
O
M
M
Status
VM1
VM2
VM
Reset
VM3
VM4
VM5
VM6
007 MLM
6 Internal Voice Mail Ports
1 Internal Modem Port (5 Unused Ports)
Summary of Contents for Lucent Technologies MERLIN LEGEND
Page 53: ...Index IN 3...
