Installation & Servicing instructions ATAG iC-Range
64
14.3.1 Setting the weather compensation
To set up the weather compensation, follow the steps below.
1
Turn the selector wheel to highlight the Parameters Zone you want to set.
In this case
Zone 1 Parameters
.
Press
OK
.
2
Turn the selector wheel to highlight
4.7 Zone regulation Parameters
.
Press
OK
.
3
Turn the selector wheel to highlight
4.7.0 Heating Type
.
Press
OK
.
Make a choise between:
0 Underfoor
or
1 Radiator
or
2 Underfloor (main) + radiator
or
3 Radiators (main) + underfoor
or
4
Convector
or
5
Air
heating
Press
BACK
to the
4.7 Zone regulation Parameters screen
.
4
Turn the selector wheel to highlight
4.7.2 Building Isolation Level
.
Press
OK
.
Make a choise between:
0 Poor
or
1
Average
or
2 Good
Press
BACK
to the
4.7 Zone regulation Parameters screen
.
5
Turn the selector wheel to highlight
4.7.3 Building Size
.
Press
OK
.
Make a choise between:
0 Small
or
1
Average
or
2 Large
6
Turn the selector wheel to highlight
4.7.1 Room Influence
.
Press
OK
.
7
Turn the selector wheel to set the Room Influence
0 OFF
.
