manualshive.com logo in svg

Asus Z10PH-D16, User Manual, Page: 141 / 184

Share
Download
Asus Z10PH-D16 User Manual Download Page 141

5-27

ASUS Z10PH-D16

5.3.2 

Deleting a RAID set

Take caution when deleting a RAID set. You will lose all data on the hard disk drives when 

you delete a RAID set.

To delete a RAID set:

1. 

From the utility main menu, select 

2. Delete RAID Volume

 and press <Enter>. 

2. 

From the Delete Volume Menu, press the up/down arrow keys to select the RAID set 

you want to delete then press <Del>. 

3. 

Press <Y> to confirm deletion of the selected RAID set and return to the utility main 

menu, or press <N> to return to the 

DELETE VOLUME

 menu.

[ESC]-Previous Menu

[  ]-Select

Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023

Copyright(C) 2003-12 Intel Corporation.  All Rights Reserved.

[

 DELETE VOLUME MENU 

]

[

 HELP 

]

Deleting a volume will reset the disks to non-RAID

WARNING:

 ALL DISK DATA WILL BE DELETED.

(This does not apply to Recovery volumes)

[DEL]-Delete Volume

Name       Level          Drives      Capacity      Status     Bootable

Volume0    RAID0(Stripe)       2        298.0GB      Normal     Yes

ALL DATA IN THE VOLUME WILL BE LOST!

(This does not apply to Recovery volumes)

Are you sure you want to delete volume “Volume0”? (Y/N):

[

 

DELETE VOLUME VERIFICATION

 

]

Summary of Contents for Z10PH-D16

























































































































































































Reviews:

No comments