Chapter 2: Hardware setup
2-6
3. Lift the load lever in the direction of
the arrow to a 135º angle.
4. Lift the load plate with your thumb
and forefinger to a 100º angle (A),
then push the PnP cap from the load
plate window to remove (B).
5. Position the CPU over
the socket, making sure
that the gold triangle is
on the bottom-left corner
of the socket. The socket
alignment key should fit
into the CPU notch.
Alignment key
Gold triangle mark
Load plate
A
B
The CPU fits in only one correct orientation. DO NOT force the CPU into the
socket to prevent bending the connectors on the socket and damaging the CPU!
Summary of Contents for TW300-E5/PI4
Page 12: ...xii ...
Page 68: ...Chapter 3 Motherboard information 3 22 ...
Page 132: ...5 22 Chapter 5 RAID configuration ...
