manualshive.com logo in svg

Asus TW300-E5/PI4, User Manual

Share
Download
Asus TW300-E5/PI4 User Manual Download Page 113

ASUS TW300-E5/PI4

5-3

5.1.2 

Installing hard disk drives

The motherboard supports Serial ATA hard disk drives. For optimal performance, 

install identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID configuration:

1.  Install the SATA hard disks into the drive bays.

2.  Connect the SATA signal cables.

3.  Connect a SATA power cable to the power connector on each drive.

5.1.3 

Setting the RAID item in BIOS

You must set the RAID item in the BIOS Setup before you can create a RAID 

set(s). To do this:

1.  Enter the BIOS Setup during POST.

2.  Go to the 

Main

 Menu, select 

SATA Configuration

, then press <Enter>.

3.  Select the item 

Configure SATA as

, then press <Enter> to display the 

configuration options.

4.  Select 

RAID

 from the Configure SATA as item options, then press <Enter>.

5.  Save your changes, then exit the BIOS Setup.

Refer to 

Chapter 4

 for details on entering and navigating through the BIOS 

Setup.

Summary of Contents for TW300-E5/PI4















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands