Asus TW300-E5/PI4 User Manual Download Page 74

Page: 74 / 174

Chapter 4: BIOS setup

4-6

4.1.3

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go

through the long process of booting from a floppy disk and using a DOS-based

utility. The EZ Flash 2 utility is built in the BIOS chip so it is accessible by pressing

<Alt> + <F2> during the Power-On Self Tests (POST).
To update the BIOS using EZ Flash 2

1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for

the motherboard.

2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the

system.

3. You can launch the EZ Flash 2 by two methods.

(1)

Insert the floppy disk / USB flash disk that contains the BIOS file to the

floppy disk drive or the USB port.

Press <Alt> + <F2> during POST to display the following.

(2) Enter BIOS setup program. Go to the

Tools

menu to select

EZ Flash 2

and press <Enter> to enable it.

You can switch between drives by pressing <Tab> before the correct file

is found. Then press <Enter>.

4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update

process and automatically reboots the system when done.

• This function can support devices such as a USB flash disk or a floppy disk

with

FAT 32/16

format and single partition only.

• Do not shut down or reset the system while updating the BIOS to prevent

system boot failure!

ASUSTek EZ Flash 2 BIOS ROM Utility V3.06

Current ROM

Update ROM

Note

[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move

FLASH TYPE:

WINBOND W25P/X16

PATH:

A:\

BOARD:

P5E WS Pro

VER:

0123

DATE:

08/27/07

BOARD:

Unknown

VER:

Unknown

DATE:

Unknown

Summary of Contents for TW300-E5/PI4















































































































































































Search results

Summary of Contents for TW300-E5/PI4

Reviews:

Related manuals for TW300-E5/PI4

Brands by name

Popular brands

Asus TW300-E5/PI4, User Manual

Search results

Summary of Contents for TW300-E5/PI4

Reviews:

Related manuals for TW300-E5/PI4

Brands by name

Popular brands