Asus TW300-E5/PI4 User Manual Download Page 40

Page: 40 / 174

Chapter 2: Hardware setup

2-20

6. Align the card connector with the

slot, then press firmly until the card

is completely seated on the slot.

7. Restore the expansion card lock

to its original position and push it

down until you hear a click sound.

2.7.2

Configuring an expansion card

After installing the expansion card, configure it by adjusting the software settings.

1. Turn on the system and change the necessary BIOS settings, if any. See

Chapter 4 for information on BIOS setup.

2. Assign an IRQ to the card. Refer to the tables on the next page.

3. Install the software drivers for the expansion card.

When using PCI cards on shared slots, ensure that the drivers support “Share

IRQ” or that the cards do not need IRQ assignments. Otherwise, conflicts will

arise between the two PCI groups, making the system unstable and the card

inoperable. Refer to the table on the next page for details.

Summary of Contents for TW300-E5/PI4















































































































































































Search results

Summary of Contents for TW300-E5/PI4

Reviews:

Related manuals for TW300-E5/PI4

Brands by name

Popular brands

Asus TW300-E5/PI4, User Manual

Search results

Summary of Contents for TW300-E5/PI4

Reviews:

Related manuals for TW300-E5/PI4

Brands by name

Popular brands