manualshive.com logo in svg

Asus TS300-E5, User Manual

Share
Download
Asus TS300-E5 User Manual Download Page 94

Chapter 5: BIOS setup

5-2

5.1 

Managing and updating your BIOS

The following utilities allow you to manage and update the motherboard Basic 

Input/Output System (BIOS) setup.

1. 

ASUS AFUDOS

 (Updates the BIOS in DOS mode using a bootable floppy 

disk.) 

2. 

ASUS CrashFree BIOS 3

 (Updates a corrupted BIOS file using the USB 

flash disk or the floppy disk that contains the updated BIOS file.)

Refer to the corresponding sections for details on these utilities.

5.1.1 

Creating a bootable floppy disk

1.  Do either one of the following to create a bootable floppy disk.

DOS environment

a.  Insert a 1.44MB floppy disk into the drive.

b.  At the DOS prompt, type 

format A:/S

 then press <Enter>.

Windows

®

 Server environment

a.  Insert a 1.44 MB floppy disk to the floppy disk drive. 

b.  Click 

Start

 from the Windows

®

 desktop, then select 

My Computer

.

c.  Select the 

3 1/2 Floppy Drive

 icon.

d.  Click 

File

 from the menu, then select 

Format

. A Format 3 1/2 Floppy Disk 

window appears.

e.  Select 

Create an MS-DOS startup disk

 from the format options field, 

then click 

Start

.

2.  Copy the original or the latest motherboard BIOS file to the bootable floppy 

disk.

Save a copy of the original motherboard BIOS file to a bootable floppy disk in 

case you need to restore the BIOS in the future. Copy the original motherboard 

BIOS using the AFUDOS utility.

Summary of Contents for TS300-E5



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands