Asus TS300-E5 User Manual Download Page 211

Page: 211 / 218

ASUS TS300-E5

7-25

7.5

Management applications and

utilities installation

The support CD that came with the motherboard package contains the drivers,

management applications, and utilities that you can install to avail all motherboard

features.

The contents of the support CD are subject to change at any time without

notice. Visit the ASUS website (www.asus.com) for updates.

7.5.1

Running the support CD

Place the support CD to the optical drive. The CD automatically displays the

Drivers menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

CD to locate the file ASSETUP.EXE from the BIN folder. Double-click the

ASSETUP.EXE

to run the CD.

7.5.2

Drivers menu

The Drivers menu shows the available device drivers if the system detects installed

devices. Install the necessary drivers to activate the devices.

The screen display and driver options vary under different operating system

versions.

Summary of Contents for TS300-E5



























































































































































































































Search results

Summary of Contents for TS300-E5

Reviews:

Brands by name

Popular brands

Asus TS300-E5, User Manual

Search results

Summary of Contents for TS300-E5

Reviews:

Brands by name

Popular brands