manualshive.com logo in svg

Asus TS300-E5, User Manual

Share
Download
Asus TS300-E5 User Manual Download Page 204

7-18

Chapter 7: Driver installation

SuSE Linux

During SuSE Linux OS installation

To install the RAID controller driver when installing SuSE Linux OS:

1.  Start the SuSE Linux Installation by booting from the install CD.

2.  As the system boots, press F5 for the Driver Disk.

3.  Move the cursor to the 

Installation – ACPI Disabled

 option, and press 

Enter.

4.  When the installer displays, “

Please insert the Driver Update floppy/

CDROM

,” insert the LSI driver disk, then press Enter.

5.  When the 

Driver Update Menu

 pops up, click 

OK

, then click 

Back

 to 

return to the installer.

6.  Follow the on-screen prompts to complete the installation.

To an existing SuSE Linux OS

To install the RAID controller driver on an existing SuSE Linux OS:

1.  Insert the LSI driver diskette into the floppy drive.
2.  Log in as 

root

.

3.  Type 

mount /dev/fd0 /media/floppy

.

4.  Type 

cd /media/floppy

5.  Type 

./install

.

6.  Type 

cd; umount /media/floppy

.

7.  Remove the LSI driver diskette.

8.  Type 

reboot

 to restart the system.

Summary of Contents for TS300-E5



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands