Asus RT-AX1800U User Manual Download Page 72

Page: 72 / 95

5 Utilities

NOTES:

• Download and install the wireless router's utilities from the ASUS

website:

• Device Discovery v1.4.7.1 at http://dlcdnet.asus.com/pub/ASUS/

LiveUpdate/Release/Wireless/Discovery.zip

• Firmware Restoration v1.9.0.4 at http://dlcdnet.asus.com/pub/

ASUS/LiveUpdate/Release/Wireless/Rescue.zip

• The utilities are not supported on MAC OS.

5.1 Device Discovery

Device Discovery is an ASUS WLAN utility that detects an ASUS

wireless router device, and allows you to configure the wireless

networking settings.

To launch the Device Discovery utility:

• From your computer’s desktop, click

Start

All Programs

ASUS Utility

Wireless Router

Device Discovery

NOTE:

When you set the router to Access Point mode, you need to use

Device Discovery to get the router’s IP address.

Summary of Contents for RT-AX1800U
































































































Search results

Summary of Contents for RT-AX1800U

Reviews:

Related manuals for RT-AX1800U

Brands by name

Popular brands

Asus RT-AX1800U, User Manual

Search results

Summary of Contents for RT-AX1800U

Reviews:

Related manuals for RT-AX1800U

Brands by name

Popular brands