Asus RT-AX1800U User Manual Download

Page: 93 / 95

apply in other circumstances.

It is not the purpose of this section to induce you to infringe

any patents or other property right claims or to contest

validity of any such claims; this section has the sole purpose

of protecting the integrity of the free software distribution

system, which is implemented by public license practices.

Many people have made generous contributions to the wide

range of software distributed through that system in reliance

on consistent application of that system; it is up to the author/

donor to decide if he or she is willing to distribute software

through any other system and a licensee cannot impose that

choice.

This section is intended to make thoroughly clear what is

believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in

certain countries either by patents or by copyrighted interfaces,

the original copyright holder who places the Program under

this License may add an explicit geographical distribution

limitation excluding those countries, so that distribution is

permitted only in or among countries not thus excluded. In

such case, this License incorporates the limitation as if written

in the body of this License.

9. The Free Software Foundation may publish revised and/or new

versions of the General Public License from time to time. Such

new versions will be similar in spirit to the present version, but

may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the

Program specifies a version number of this License which

applies to it and “any later version”, you have the option of

following the terms and conditions either of that version or of

any later version published by the Free Software Foundation. If

the Program does not specify a version number of this License,

you may choose any version ever published by the Free

Software Foundation.

10. If you wish to incorporate parts of the Program into other

free programs whose distribution conditions are different, write

Summary of Contents for RT-AX1800U
































































































Search results

Summary of Contents for RT-AX1800U

Reviews:

Related manuals for RT-AX1800U

Brands by name

Popular brands

Asus RT-AX1800U, User Manual

Search results

Summary of Contents for RT-AX1800U

Reviews:

Related manuals for RT-AX1800U

Brands by name

Popular brands