Asus RT-AX1800U User Manual Download Page 79

Page: 79 / 95

The client cannot establish a wireless connection with the

router.

NOTE:

If you are having issues connecting to 5GHz network, make

sure that your wireless device supports 5GHz or features dual band

capabilities.

• Out of Range:

• Move the router closer to the wireless client.
• Try to adjust antennas of the router to the best direction as

described in section

1.4 Positioning your router

• DHCP server has been disabled:

1. Launch the web GUI. Go to

General

Network Map

Clients

and search for the device that you want to connect

to the router.

2. If you cannot find the device in the

Network Map

, go to

Advanced Settings

LAN

DHCP Server

Basic Config

list, select

Yes

on the

Enable the DHCP Server

Summary of Contents for RT-AX1800U
































































































Search results

Summary of Contents for RT-AX1800U

Reviews:

Related manuals for RT-AX1800U

Brands by name

Popular brands

Asus RT-AX1800U, User Manual

Search results

Summary of Contents for RT-AX1800U

Reviews:

Related manuals for RT-AX1800U

Brands by name

Popular brands