Asus RT-AX1800U User Manual Download Page 6

Page: 6 / 95

1 Getting to know your wireless

router

1.1 Welcome!

Thank

you for purchasing an ASUS RT-AX1800U Wireless Router!

The ultra-thin and stylish RT-AX1800U features a 2.4GHz and 5GHz

dual bands for an unmatched concurrent wireless HD streaming

and the ASUS Green Network Technology, which provides up to

70% power-saving solution.

1.2 Package contents

RT-AX1800U Wireless Router

Network cable (RJ-45)

Power adapter

Quick Start Guide

NOTES:

• If any of the items are damaged or missing, contact ASUS for

technical inquiries and support. Refer to the ASUS Support Hotline

list at the back of this user manual.

• Keep the original packaging material in case you would need future

warranty services such as repair or replacement.

Summary of Contents for RT-AX1800U
































































































Search results

Summary of Contents for RT-AX1800U

Reviews:

Related manuals for RT-AX1800U

Brands by name

Popular brands

Asus RT-AX1800U, User Manual

Search results

Summary of Contents for RT-AX1800U

Reviews:

Related manuals for RT-AX1800U

Brands by name

Popular brands