Asus RS700-E8-RS4 Series Page 63 User Manual Download

Page: 63 / 212

ASUS RS700-E8-RS4 Series

4-13

System fan connectors (4-pin FAN1-8)

The fan connectors support cooling fans of 0.8A–1.0A (12 W max.) or a total of 6.4

A–8.0 A (96 W max.) at +12V. Connect the fan cables to the fan connectors on the

motherboard, making sure that the black wire of each cable matches the ground pin of

the connector.

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside

the system may damage the motherboard components. These are not jumpers! DO NOT

place jumper caps on the fan connectors!

TPM connector (20-1 pin TPM1)

This connector supports a Trusted Platform Module (TPM) system, which can securely

store keys, digital certificates, passwords, and data. A TPM system also helps enhance

network security, protects digital identities, and ensures platform integrity.

Summary of Contents for RS700-E8-RS4 Series





















































































































































































































Search results

Summary of Contents for RS700-E8-RS4 Series

Reviews:

Related manuals for RS700-E8-RS4 Series

Brands by name

Popular brands

Asus RS700-E8-RS4 Series, User Manual

Search results

Summary of Contents for RS700-E8-RS4 Series

Reviews:

Related manuals for RS700-E8-RS4 Series

Brands by name

Popular brands